Kore Essentials Basketweave Duty Belt 2.25" with D1 Buckle

Kore Essentials Basketweave Duty Belt 2.25" with D1 Buckle

Designed for law enforcement, military, and security professionals to deliver comfort, adjustability, and support. Both the outer and inner belt feature our reinforced Power-Core™ center, delivering superior strength and long-term durability. The outer Basketweave Duty Belt is twice as tough as leather, weather and scratch-resistant for long term use, while delivering the same premium look and feel of regular leather. Kore's inner belt incorporates a section of flexible material which adjusts in unison with the outer belt, avoiding bulky overlap and improving adjustability.

Buckles built with ultralight materials like aluminum that incorporate a spring-loaded ratcheting adjustment system and dual release lever system to stay secure under force. The 2.25" width provides optimal support and will distribute weight of attached equipment for all day comfort. Whether you're outfitting a professional duty rig, replacing an everyday work belt, the Kore Basketweave Duty Belt 2.25" with D1 Buckle will provide you a secure, comfortable, and professional work belt.

**Cut or Altered Belts Are NOT Eligible For Returns Or Refunds. Please Follow Sizing Instructions Carefully.**

Details

• Includes: D1 Buckle, Black Basketweave Armortek Duty Outer Belt 2.25", Black Inner Velcro Belt 1.5", Tip Keeper, Inner Belt Clip, Sizing Tape, Hex Wrench & Set Screws
• Belt Width: 2.25"
• Belt Thickness: 7mm
• Size: 24" - 48"
• Load Rating: Up to 30 lbs
• Cut to Size
• 1/4" Increments for Micro-Adjustment Fitment
• With Security Lever for Seamless Adjustments
• Power-Core Center for Rigidity & Support
• Armortek - Manmade Super-Fiber Engineered to Outperform & Outlast Leather Belts

Sizing Instructions

1. Size Outer Belt 

• Line up the measuring tape next to the outer belt, find pant size on measuring tape & cut on the mark. 
• Example: If your pant size is 36", cut the outer belt at the 36" mark. 

2. Size Inner Velcro Belt

• Line up the measuring tape next to the inner belt, find pant size on measuring tape, subtract 1" & cut the inner belt at the mark. 
• Example: If your pant size is 36", cut the inner belt at the 35" mark. 

3. Attach Buckle to Outer Belt

• Back out the 2 set screws on the back of the buckle, insert the cut end of the outer belt into the buckle receptacle, clamp teeth down firmly & gently tighten the set screws until flush. Do not overtighten or force the set screws.

4. Try Belts on for Size

• First, feed inner belt through your belt loops, attach the 2 velcro sides of the inner belt & center the flex material section over your zipper. There should not be any velcro belt visible behind the flex material section. If there is, remove & trim off that amount.
• Next, place the buckle on the right edge of the flex material section & attach the outer belt around your waist overtop the inner belt. 
• Feed the tip of the belt through the buckle & pull snug. Use the included tip keeper to secure the tip of the belt. 

5. Final Step

• If you can't make your belt tight enough, it's too long. Remove the outer belt & buckle, then cut an inch at a time until ideal fit is reached.
• Last, singe or trim excess fibers from the cut end of the inner velcro belt & attach metal clip to the cut end of the inner belt. 

Battle Belt Setup Tip: Bend the outer belt slightly backward to open up MOLLE for easy gear installation.